Feeds:
Posts
Comments

Posts Tagged ‘Near-shore technology’

JENNIFER DART, Westerly News, June 3, 2010

Several groups working on wave energy on the British Columbia coast gathered in Ucluelet this week to discuss developments in the industry and update local projects.

Representatives from the non-profit Ocean Renewable Energy Group (OREG) chaired the community open house, held June 1 at the Ucluelet Community Centre.

Also in attendance were academics, developers, and representatives from all levels of government, including the Yuu-cluth-aht First Nation and the District of Ucluelet.

OREG executive director Chris Campbell said developing the technology to harness energy from the ocean is a “long, slow process,” but Canadian companies are active internationally, “so it’s gradually becoming more and more real.”

The Ucluelet/Tofino area has long been considered an ideal site for an ocean renewable energy project given its coastal location and proximity to the BC Hydro grid.

“Ocean renewable energy is something that’s been making rattling noises for quite a few years in our area,” said Ucluelet mayor Eric Russcher. “It would be a new and different world we live in but an exciting prospect for us all.”

According to information from OREG, preliminary studies indicate the wave energy potential off Canada’s Pacific Coast is equal to approximately half of Canada’s electricity consumption.

There seems to be a new energy behind wave power in recent months, given in part to new advances in technology, and also specifically in B.C. because of the Liberal government’s Clean Energy Act, which has been tabled in the legislature but has yet to be passed.

Jeff Turner from the Ministry of Energy, Mines and Petroleum Resources said the Act is meant to achieve energy efficiency while maintaining low rates, generate employment in the clean energy sector, and reduce greenhouse gas emissions.

While critics of the Act say it gives the province oversight on major projects like the Site C dam on the Peace River and could be mean higher hydro rates, the announcement has helped kick start development in areas like wave energy, where researchers are currently focused on pinpointing potential outputs.

Two wave energy projects are in development on the West Coast; one for the waters off Ucluelet and one in close proximity to the Hesquiaht communities at Hesquiaht Harbour and Hot Springs Cove.

John Gunton of SyncWave Systems Inc. presented his company’s plan for the SyncWave Power Resonator, a buoy class device that would be slack moored in depths of up to 200 metres. Simply put, this device captures energy from the upward and downward motion of the wave. Gunton said the company has provincial and federal funding, but is looking for a $3 million investment to complete its first two phases of development for placement near Hesquiaht Point.

A test resonator placed eight kilometres off Ucluelet in 40 metres of waters in December was collecting data for a period of about one month until a mast on it was destroyed. It was repaired, upgraded and redeployed in late April and a website will be set up by a group called the West Coast Wave Collaboration that is comprised of academics and industry representatives to transmit power data. Local partners in this project include the Ucluth Development Corporation, the District of Ucluelet and Black Rock Resort.

The other technology is a near shore device, placed in depths of 35 to 50 metres. The CETO device is owned by Carnegie Wave Energy of Australia, and was presented by David King at the open house. Seven metre cylinders capture wave energy and pump it to an onshore turbine. A government grant will also assist in the development of this technology.

But Jessica McIvoy of OREG said there are many questions left to be answered including what are the impacts on the ocean environment and sea life of such devices, and in turn how will the devices last in the ocean?

Campbell said an adaptive management approach to the technology seems like the best option to proceed with preliminary work, taking into account “critical indicators” in the natural environment.

Yuu-cluth-aht chief councillor Vi Mundy said she’s interested in these indicators after hearing concerns from her community, from fishers for example: “I’m hearing questions like what kind of impact will there be and what kind of standards have been developed so far [in the wave energy industry].”

But she also noted young people in her community are asking for green development that will provide year round employment.

“It’s really good to see that in young people,” Mundy said.

Anyone with questions about wave technology on the coast is invited to contact OREG at questions@oreg.ca.

Advertisements

Read Full Post »

MendoCoastCurrent, October 30, 2009

oyster_prototype_device_aquamarine_powerJust last week in Scotland the Oyster from Aquamarine Power passed a crucial test and is no longer in locked-down position on the seabed. Now the Oyster moves back and forth in the ocean waves, pumping high-pressure water to its onshore hydro-electric turbine as it readies for full-commissioning.

The Oyster captures energy found in near-shore waves up to depths of 10 to 12 metres and consists of a hinged flap connected to the seabed at around 10m depth. Each passing wave moves the flap which drives a hydraulic piston to deliver high-pressure water to an onshore turbine which generates electricity. The Oyster now goes through commissioning in advance of grid connection as the official switch on by Scotland’s First Minister Alex Salmond is set for on November 20, 2009.

Martin McAdam, Aquamarine Power chief executive said: “We are delighted to have passed this crucial stage in commissioning the world’s very first Oyster wave energy convertor. This major milestone shows that the Oyster does what we have always believed it will do, and we look forward to completing commissioning and producing clean, green energy from Scotland’s waves in the coming months.”

Read Full Post »

Hydro Review, August 18, 2009

aquamarine-power_fb8xa_69Off the north coast of Scotland in waters 10 to 12 meters deep, ocean energy developer Aquamarine Power Ltd. has bolted its Oyster wave energy converter to the ocean floor and expects to be generating power by year’s end.

A team of offshore professionals eased the 194-ton converter into the sea at the European Marine Energy Center in the Orkney Islands. “Getting Oyster into the water and connected to the seabed was always going to be the most difficult step,” said Aquamarine CEO Martin McAdam. “Its completion is a real credit to everyone who has worked hard on planning and executing this major engineering feat on schedule.”

The Oyster is designed to capture energy from near-shore waves. The system includes an oscillating pump fitted with double-acting water pistons. Each wave activates the pump, delivering high-pressure water by pipeline to an onshore turbine that generates electricity. All electrical components of the Oyster are onshore, making it durable enough to withstand Scotland’s rough seas, McAdam said.

Marine constructor Fugro Seacore installed the Oyster converter under a $2.9 million contract.

Read Full Post »

MendoCoastCurrent, August 4, 2009

oyster_prototype_device_aquamarine_powerOyster nearshore wave energy technology from Aquamarine Power is in the process of being placed on the seabed in the Atlantic off the coast of the Orkney Islands, Scotland for trials in autumn 2009.

The Oyster is based on a large, hydraulic oscillator fitted with pistons and activated by waves.  The oscillation pumps pressurized water through a pipeline to the shore.  Onshore, conventional hydro-electric generators convert the high-pressure water into electricity.

The concept is based on research from Queen’s University in Belfast. “Oyster’s technology is highly innovative because it relies on simplicity,” says Ronan Doherty, CTO at Aquamarine Power.

“Its offshore component – a highly reliable flap with minimal submerged moving parts – is the key to its success when operating in seas vulnerable to bad weather where maintenance can be very difficult.”  Doherty adds that as there is no underwater generator, electronics or gearbox and all the power generation equipment in onshore, where it is easily accessible.

Oyster technology is best deployed in near-shore regions at depths of 26-52 feet, where wave action tends to be more consistent and less variable in direction. The smaller size of waves near the shore also maximizes the lifetime of the device and the consistency of power generation. Each Oyster has a peak capacity of 300-600 kW but is designed to be deployed in multiple arrays.

Although still in the early stages of development, Aquamarine Power believes Oyster has great potential. “Our computer modeling of coastlines suitable for this technology shows that Spain, Portugal, Ireland and the UK are ideal candidates in Europe,” says Doherty. “But globally there is huge scope in areas like the Northwest coast of the U.S. and coastlines off South Africa, Australia and Chile.”

Read Full Post »